• 歡迎來到北京多多賓城建筑機械有限公司
    010-61441596
    永光機械
    永光機械
      Product

    產品展示

    產品展示PRODUCT

    GQ50型鋼筋切斷機


    GQ50型鋼筋切斷機主要技術參數(鋼筋抗拉強度σb450Mpa以下)

    GQ50 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb450Mpa below)

     

    項目/型號Item/Model

    GQ50

    切斷鋼筋最大直徑(mm

    Maximum Cutting Steel Bar Diameter

    φ6-φ50

    切螺紋鋼最大規格(mm

    Cutting Deformed Steel Bar Diameter

    Ⅱ級螺紋鋼

    Grade II Thread steel

    φ6-φ40II級螺紋鋼)

    Ⅲ級螺紋鋼

    Grade III Thread steel

    φ6-φ36(Ⅲ級螺紋鋼)

    切刀公稱沖程(mm

    Cutting Knife Nominal Stroke

    44

    連續切斷次數(次/minContinuous Cutting Off Times

    32

    電動機型號Motor Model

    Y112M-2

    電動機功率Motor Power

    4.0Kw

    額定電壓Rated voltage

    380 V±5%

    電動機轉速Motor Rotating Speed

    2880r/min

    外型尺寸(mmDimensions

    1485×615×740

    包裝尺寸(木箱出口型)

    Package Size(wooden box export)

     

    整機質量The Whole Weight

    570±10Kg

     



    GQ50型鋼筋切斷機,適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷,也可用于切斷扁鋼、方鋼、螺紋鋼和角鋼,為您的施工降低大量的人力,大幅提高功效。該機具有以下特點。

    1、  體積小、結構緊湊、噪音低,沖程大。

    2、  潤滑性能好:采用箱式封閉結構,齒輪飛濺潤滑(油面應不高于油標刻線,使機器始終處于適當的潤滑狀態)

    3、  功率損耗少:因潤滑條件的改善,齒輪軸端采用滾動軸承,阻力小,與同類切斷機相比同負載時功率損耗可降低三分之一。

    4、移動方便:四輪著地,機動靈活,穩定可靠,維修方便

     

    GQ50 Reinforcing Bar Cutting Machine, is used to cut off all kinds of normal carbon steel, hot rolling bar and deformed steel bar used in concrete, and its biggest advantage is cut off the deformed steel bars. The cross-section of the steel bar end cut by this machine is very parallel and level, which can be directly for threading working. It reduce the worker number and improve the efficiency significantly. This machine has the following characteristise.

    1、  Small volume, compact structure, low noise, large stroke.

    2、  Lubricating performance: adopt the box-type closed structure, gear spiash lubrication (oil surface should not be higher than standard oil groove, so that the machine is always in a proper lubrication state)

    3、  Less power loss: due to the improvement of lubrication condition, gear shaft end uses rolling bearings, the resistance is small,compared with the same kind of cutting machine, the power loss can be reduced by 1/3.

    4、  Convenient movement: the four wheels on the ground, flexible, stable and reliable, convrnient maintenance.


    Copyright 2017 北京多賓城建筑機械有限公司 All Rights Reserved 京ICP備17023354號-1
    技術支持:北京網站建設
    亚洲WM高清在线_亚洲第一SE情网站_亚洲欧美一区二区三区情侣_免费